Description
BFDS2588-SD Multioutlet Centrifugal Pump Horizontal Multistage
1? Product introduction
SD series multistage pump is a new generation of multistage pump products newly designed by our company. Its hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of the pump in various applications.
2? Product features
1. SD multistage pump this type of pump is a multistage centrifugal pump with segmental, horizontal and closed impeller. It includes 10 sizes and specifications. Each specification has 2 to 10 stages of impeller at most. It adopts a unique combination of axial force balance: balance hole (double sealing ring), labyrinth throttling sleeve and pressure relief pipe. The residual axial force is borne by a group of angular contact ball bearings.
2. Impellers with different diameters can be installed to meet the different performance requirements of users and reduce power loss.
3. For pumps with specifications of KDW25 ~ KDW80, the pump foot of the suction section is located on the first stage terminal, and the direction of the suction inlet can be adjusted appropriately to adapt to different installation conditions.
4. The drive end is located on the suction side of the pump.
3? Technical parameters
Lift: 8.75-360m
Flow: 1.8-500m³/h
Pump diameter: suction 40 ~ 250mm
Discharge diameter: 25 ~ 200mm
Liquid temperature: 80 ?
Shell pressure: 4.0Mpa
Select direction: the impeller rotates clockwise when viewed from the direction of the motor
Shaft seal form: packing seal or mechanical seal